Netgear R6300 R6300 User Manual (PDF) - Page 82
Advanced Wireless Settings, Advanced > Advanced Setup > Wireless Settings - bridge mode
View all Netgear R6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
R6300 WiFi Router 802.11ac Dual Band Gigabit Advanced Wireless Settings Select Advanced > Advanced Setup > Wireless Settings to display the following screen: Scroll to view more settings The following settings are available in this screen: Enable Wireless Router Radio. You can completely turn off the wireless portion of the wireless router by clearing this check box. Select this check box again to enable the wireless portion of the router. When the wireless radio is disabled, other members of your household can use the router by connecting their computers to the router with an Ethernet cable. Note: The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options are reserved for wireless testing and advanced configuration only. Do not change these settings. Turn off wireless signal by schedule. You can use this feature to turn off the wireless signal from your router at times when you do not need a wireless connection. For instance, you could turn it off for the weekend if you leave town. WPS Settings.You can add WPS devices to your network. AP Mode or Bridge. You can set up the R6300 in Bridge mode. See Set Up the Router in Bridge Mode on page 83. Wireless Card Access List. Click the Set Up Access List button display the Wireless Card Access List screen. You can restrict access to your network to specific devices based on their MAC address. Advanced Settings 82