Netgear R6300 R6300 User Manual (PDF) - Page 85
Wireless Repeating Function WDS, Up to, Wireless Base Station, Wireless Repeater - bridge
View all Netgear R6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
R6300 WiFi Router 802.11ac Dual Band Gigabit Wireless Repeating Function (WDS) You can set the R6300 WiFi Router up to be used as a wireless access point (AP). Doing this enables the router to act as a wireless repeater. A wireless repeater connects to another wireless router as a client where the network to which it connects becomes the ISP service. Wireless repeating is a type of Wireless Distribution System (WDS). A WDS allows a wireless network to be expanded through multiple access points instead of using a wired backbone to link them. The following figure shows a wireless repeating scenario. Base station access point Figure 9. Wireless repeating scenario Repeater access point Note: If you use the wireless repeating function, you need to select either WEP or None as a security option in the Wireless Settings screen. The WEP option displays only if you select the wireless mode Up to 54 Mbps in the Wireless Settings screen. Wireless Base Station. The router acts as the parent access point, bridging traffic to and from the child repeater access point. The base station also handles wireless and wired local computers. To configure this mode, you have to know the MAC addresses of the child repeater access point. Wireless Repeater. The router sends all traffic from its local wireless or wired computers to a remote access point. To configure this mode, you have to know the MAC address of the remote parent access point. Advanced Settings 85