Netgear WNR612v2 WNR612v2 User Manual (PDF) - Page 15
Table 2., Wireless Settings, Wireless Configuration - ip address
View all Netgear WNR612v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Wireless-N 150 Router WNR612v2 User Manual 2. Select Wireless Settings from the main menu: The settings for this screen are explained in Table 2. 3. Select the region in which the wireless router will operate. 4. For initial configuration and test, leave the other settings unchanged. 5. To save your changes, click Apply. 6. Configure and test your computers for wireless connectivity. Set up your wireless computers with the same SSID and wireless security settings as your wireless router. Check that they have a wireless link and are able to obtain an IP address by DHCP from the wireless router. If there is interference, adjust the channel. Table 2. Wireless Settings Settings Region Wireless Network Enable SSID Broadcast Enable Wireless Isolation Name (SSID) Description The location where the wireless router is used. If this check box is selected, the SSID is broadcast in the selected channel. If this check box is selected, computers will not be able to connect wirelessly to the wireless router. The SSID is also known as the wireless network name. Enter a 32-character (maximum) name in this field. This field is case-sensitive. When there is more than one wireless network, SSIDs provide a means for separating the traffic. To join a network, a wireless computer or device must use the SSID. Chapter 2: Wireless Configuration | 15