Netgear WNR612v2 WNR612v2 User Manual (PDF) - Page 58

Configuring Port Forwarding to Local Servers, Adding a Custom Service

Get Netgear WNR612v2 - Wireless-N 150 Router PDF manuals and user guides View all Netgear WNR612v2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Wireless-N 150 Router WNR612v2 User Manual Configuring Port Forwarding to Local Servers With port forwarding, you can allow certain types of incoming traffic to reach servers on your local network. For example, you might make a local Web server, FTP server, or game server visible and available to the Internet. Use the Port Forwarding screen to configure the router to forward specific incoming protocols to computers on your local network. In addition to servers for specific applications, you can also specify a default DMZ server to which all other incoming protocols are forwarded. The DMZ server is configured in the WAN Setup screen, as discussed in Setting Up a Default DMZ Server on page 39. Before starting, you need to determine which type of service, application, or game you will provide, and the local IP address of the computer that will provide the service. Be sure the computer's IP address never changes. Tip: To ensure that your server computer always has the same IP address, use the reserved IP address feature of your wireless router. See Using Address Reservation on page 36. To configure port forwarding to a local server: 1. Select Port Forwarding/Port Triggering under Advanced in the main menu. The Port Forwarding/Port Triggering screen displays. 2. From the Service Name list, select the service or game that you will host on your network. If it is not in the list, see the following section, Adding a Custom Service." 3. In the corresponding Server IP Address fields, enter the last digit of the IP address of your local computer that will provide this service. 4. To the right of Server IP Address, click Add. The service appears in the list in the screen. Adding a Custom Service To define a service, game, or application that does not appear in the Service Name list, you must first find out which port number or range of numbers is used by the application. You can contact the publisher of the application or user groups or news groups. 58 | Chapter 6: Fine-Tuning Your Network

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
58
|
Chapter 6:
Fine-Tuning Your Network
Wireless-N 150 Router WNR612v2 User Manual
Configuring Port Forwarding to Local Servers
With port forwarding, you can allow certain types of incoming traffic to reach servers on your
local network. For example, you might make a local Web server, FTP server, or game server
visible and available to the Internet.
Use the Port Forwarding screen to configure the router to forward specific incoming protocols
to computers on your local network. In addition to servers for specific applications, you can
also specify a default DMZ server to which all other incoming protocols are forwarded. The
DMZ server is configured in the WAN Setup screen, as discussed in
Setting Up a Default
DMZ Server
on page
39.
Before starting, you need to determine which type of service, application, or game you will
provide, and the local IP address of the computer that will provide the service. Be sure the
computer’s IP address never changes.
Tip:
To ensure that your server computer always has the same IP address,
use the reserved IP address feature of your wireless router. See
Using
Address Reservation
on page
36.
To configure port forwarding to a local server:
1.
Select Port Forwarding/Port Triggering under Advanced in the main menu. The Port
Forwarding/Port Triggering screen displays
.
2.
From the
Service Name
list, select the service or game that you will host on your network.
If it is not in the list, see the following section,
Adding a Custom Service
.”
3.
In the corresponding
Server IP Address
fields, enter the last digit of the IP address of your
local computer that will provide this service.
4.
To the right of Server IP Address, click
Add
. The service appears in the list in the screen.
Adding a Custom Service
To define a service, game, or application that does not appear in the
Service Name
list, you
must first find out which port number or range of numbers is used by the application. You can
contact the publisher of the application or user groups or news groups.