Netgear WNR612v2 WNR612v2 User Manual (PDF) - Page 22
Advanced Wireless Settings, Enable Guest Network, Enable SSID Broadcast
View all Netgear WNR612v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Wireless-N 150 Router WNR612v2 User Manual To configure a wireless guest network: 1. In the main menu, under Setup, select Wireless Settings. 2. Select any of the following Wireless settings: • Enable Guest Network - When this check box is selected, the guest network is enabled, and guests can connect to your network using the SSID of this profile. • Enable SSID Broadcast - If selected, the Wireless Access Point broadcasts its name (SSID) to all Wireless Stations. Stations can adopt the correct SSID for connections to this Access Point. • Allow Guest to access MY Local Network - If selected any user who connects to this SSID can access local networks associated with the router like users in the primary SSID. 3. Give the wireless network a name. The name is case-sensitive and can be up to 32 characters. The same name must be assigned to all wireless devices in your network. NETGEAR recommends that you change the name to a different value. 4. Select a Security option from the list. 5. Click Apply to save your selections. Advanced Wireless Settings This section describes the wireless settings that you can view and specify in the Advanced Wireless Settings screen, which you access under Advanced in the main menu. To configure the advanced wireless security settings: 1. Log in to the router as described in Logging In to Your Wireless Router on page 7. 22 | Chapter 2: Wireless Configuration