Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 153

Playback on a TV Use the AV cable provided with the camera to play back recorded images on your TV. Both still pictures and movies can be played back. Mode dial 1 Make sure that the TV and camera are turned off. Connect the A/V OUT jack on the camera to the video input terminal on the TV using the AV cable. Connect to the TV's video input (yellow) and audio input (white) terminals. Playback AV cable A/V OUT jack (MONO) 2 Turn the TV on and set it to the video input mode. • For details of switching to video input, refer to your TV's instruction manual. 3 Set the mode dial to q and turn the camera on. • The last picture taken is displayed on the TV. Use the arrow pad to 7 select the picture you want to display. • The close-up playback, index display, slideshow and other playback functions can also be used on a TV screen. TIPS • You are recommended to use the optional AC adapter when using the camera with a TV. • Make sure that the camera's video output signal type is the same as the TV's video signal type. g"VIDEO OUT - Selecting the Note video signal type" (P.194) • The camera's monitor turns off automatically when the AV cable is connected to the camera. • Be sure to use the AV cable provided to connect the camera to the TV. • The picture may appear off-center on the TV screen. • When pictures are compressed in order to fit the entire picture on the TV screen, a black frame appears around the picture. If the picture is output to a video printer via the TV, the black frame may be printed. 152