Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 157

Editing still pictures 5 Use the arrow pad, zoom lever and control dial to decide the trimming position and size. • Press acbd to select the trimming frame, and turn the zoom lever toward W or T to decide the trimming size. OK • Use the control dial to select the height and width of the trimming frame. • 3:2 trimming size can be selected when the size of the selected picture is 2592 × 1944, or 2592 × 1728. 6 Press e. • The trimmed picture is displayed for one OK second. 7 Press ac to select the card, then press e. • If only one card is inserted, skip this step. • When there is insufficient card memory, the display returns to the setting screen. 8 Press ac to select OK, then press e. 7 • The BUSY bar is displayed during trimming. After the image is saved, the OK RESEt camera returns to Step 3. • The trimmed picture is stored as a separate picture from the original. CANCEL SELECt GO • If you want to trim the picture again, select RESET and press e and repeat the procedure from Step 5. • To quit the trimming function, select CANCEL and press e. • Trimming is not possible in the following cases. Movies, when there is insufficient memory space on the card, Note or when the picture was taken with the record mode set to ENLARGE SIZE • It may not be possible to trim pictures taken with another camera. • If a trimmed picture is printed out, it may appear grainy. Playback 156