Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 40

Getting started Setting the date and time 6 Press ac to select one of the following date formats: Y-M-D (Year/Month/Day), M-D-Y (Month/ Day/Year), D-M-Y (Day/Month/Year). Then press d. Y MD • Move to the year setting. SELECt SEt GO • The following steps show the procedure used when the date and time settings are 1 set to Y-M-D. 7 Press ac to set the year, then press d to move to the month setting. • To move back to the previous setting, press b. • The first two digits of the year are fixed. SELECt SEt GO 8 Repeat this procedure until the date and time are completely set. • The time is displayed in the 24-hour format. For example, 2pm will be displayed as 14:00. 9 Press e. • For a more accurate setting, press e when the time signal hits 00 seconds. Power switch 10 To turn the camera off, set the power switch to OFF. e • The date and time settings will be canceled if the camera is left without the battery for approximately 5 days. The settings will be Note canceled more quickly if the battery was only loaded in the camera for a short time before being removed. Check that the correct date and time have been set before shooting. 39