Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 268

Connecting the camera to the computer Users running Windows 98/98SE need to install the USB drive before connecting the camera to your computer for the first time. ( p.9) 1 Some camera models have SEtUP CARD EDIt PLAY a "USB" setting in the menu. Make sure that "PC" is selected before connecting. This is not required if your camera does not have this setting. For details on how to [SETUP] tab Arrow pad Menu button operate the menu, refer to your camera's reference manual. 2 Insert the marked end of the provided USB cable into the USB port on your computer as shown below. Look for this mark. Terminal Windows USB port The location of the USB port varies depending on the computer. For details, refer to your computer's manual. 3 After making sure that the camera is turned off, connect the end of the USB cable to the USB connector on the camera. The location of the USB connector or multi connector varies depending on the camera model. Refer to the camera manual for details. Computer Rectangular terminal Smaller terminal USB port USB cable USB connector or multi connector 11