Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 87

5 Advanced shooting Aperture priority shooting Mode dial 1 Turn the control dial to set the aperture value. Turn to the left to decrease the aperture value (F number). Turn to the right to increase the aperture value (F number). Control dial • You can change the adjustment range for the aperture. g"Exposure steps - Selecting the adjustment increments" (P.174) • When the shutter button is pressed halfway, the shutter speed is displayed on the control panel. • If the image is underexposed or overexposed when the shutter button is halfway pressed, the shutter speed indication blinks. 5 Control panel Monitor Meaning Lights Displayed The aperture setting is in green suitable for the conditions. Blinks Displayed in red The aperture setting is unsuitable for the conditions. Take the following steps when the monitor is turned on. 1/2000 F2.8 4" Advanced shooting   appears: The image is overexposed. appears: The image is underexposed. Turn the control dial to the right to Turn the control dial to the left to reduce increase the aperture value. the aperture value. Aperture range: Toward W: f2.8 to f8.0, Toward T: f4.8 to f8.0 • When the flash is set to the auto-flash mode or the fill-in flash mode, the shutter speed is fixed at 1/30 sec. in the maximum wide Note angle, or 1/100 sec. in the maximum telephoto, and will not go slower. 86