Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 35
is aligned with the, so that OFF is aligned with
View all Olympus 5060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Turning the power on/off 3 Turn the mode dial until the mode you want to use is aligned with the red line. g"Shooting mode" (P.59) Mode dial Getting started 1 4 Turn the power switch so that ON is aligned with the ( mark. • When the mode dial is set to a mode other than q, the camera turns on in the shooting mode. The monitor turns on and the lens extends. • When the mode dial is set to q, the camera turns on in the playback mode and the monitor turns on. • You can also change the mode with the camera turned on. Power switch (Power off 1 To turn the power off, turn the power switch so that OFF is aligned with the ( mark. • The monitor turns off, the lens retracts and the power turns off. 2 Turn the monitor towards the camera and close it. • To protect the monitor, you are recommended to keep it closed when the camera is not in use. TIPS • To reduce battery consumption, the camera automatically enters the sleep mode after about 3 minutes of non-operation. The camera activates again as soon as you touch the shutter button or zoom lever. • To reduce battery consumption, the camera turns off automatically and the lens retracts after about 4 hours of non-operation. To resume operation, turn the camera on again. • If the camera is subjected to strong vibration or impact while it is turned on, it may turn off momentarily and the date and other Note settings return to the factory default settings. 34