Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 24

1 Getting started Attaching the strap 1 Pass the lens cap string through the hole in the lens cap, then pass the other end through the loop and pull tight. Getting started 2 Pull the ends of the strap out of the stopper and ring. Stopper 3 Thread the strap (A) through the string loop (attached to the lens cap in A Step 1). Then thread it through the strap eyelet on the camera. 1 Ring 4 Thread the end of the strap back through the ring as indicated by the arrow. Adjust the strap to the desired length. Strap eyelet 5 Thread the end of the strap back B through the stopper as indicated by the arrow. Pull the strap (B) tight and make sure it is fastened securely. 6 Attach the strap to the other eyelet following Steps 3 to 5. • Be careful with the strap when you carry the camera, as it can easily catch on stray objects, causing injury or damage. Note • Attach the strap correctly as described in the above steps so that the camera does not fall off. If the strap is attached incorrectly and the camera falls off, Olympus is not responsible for any damages. 23