Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 86
Using a slave flash mode, to select an emission
View all Olympus 5060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
External flash (optional) Using a slave flash mode This setting is for when using a commercially available slave flash that is synchronized with the camera flash.The amount of light emitted by the flash can be adjusted in 10 levels. The flash can fire in sequential shooting mode, but the interval between shots will be longer if a high emission level is set. AUTO, ! : The setting is automatically changed to #(Fill-in flash). H SLOW : The setting is automatically changed to #SLOW1. Mode dial 1 In the top menu, select MODE MENU → CAMERA → QFLASH → SLAVE, and press d. g"How to use the menus" (P.49) 4 2 Press ac to select an emission level from 1 to 10, then press e. 3 Press e repeatedly until the menu goes off. Arrow pad OK button Flash 85
85
External flash (optional)
4
Flash
Using a slave flash mode
This setting is for when using a commercially available slave flash that is
synchronized with the camera flash.The amount of light emitted by the flash
can be adjusted in 10 levels. The flash can fire in sequential shooting mode,
but the interval between shots will be longer if a high emission level is set.
AUTO,
!
:
The setting is automatically changed to
#
(Fill-in flash).
H
SLOW
:
The setting is automatically changed to
#
SLOW1.
1
In the top menu, select MODE
MENU
→
CAMERA
→
Q
FLASH
→
SLAVE, and press
d
.
g
“How to use the menus” (P.49)
2
Press
ac
to select an emission
level from 1 to 10, then press
e
.
3
Press
e
repeatedly until the menu goes off.
Mode
dial
Arrow pad
OK button