Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 223
If an error code is displayed - problem
View all Olympus 5060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
If an error code is displayed If an error code appears on the camera's monitor during direct print setting or printing, see the following table. For more details, refer to the printer's instruction manual. Monitor indication Possible cause Corrective action The camera is not Disconnect the camera NO CONNECTION connected to the printer correctly. and connect it again correctly. NO PAPER There is no paper in the Load some paper in the printer. printer. The printer has run out of Replace the ink cartridge ink. in the printer. NO INK PRINT ERROR There is a problem with Turn off the camera and the printer and/or printer, then turn them on camera. again. JAMMED The paper is jammed. Remove the jammed paper. TIPS • If an error code other than those shown above is displayed, refer to "Error codes" (P.223). 10 Direct printing 222