Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 230

Troubleshooting (Playback of recorded images Possible cause Corrective action The picture is out of focus. A subject unsuited to Use manual focus or focus lock to focus on the AF was taken subject and then shoot. The camera moved when the shutter button was pressed. Hold the camera correctly and press the shutter button gently. The flash was set to the flash off mode in a lighting condition requiring use of the flash. Select a flash mode other than flash off. Camera movement occurs easily with slower shutter speeds. Use a tripod, or set the flash to AUTO. The lens was dirty. Clean the lens. Use a commercially available blower blush and then wipe with a lens cleaner to remove dust. Mold may form on the lens surface if the lens is left dirty. The picture is too bright. The flash was set to Select a flash mode other than fill-in flash. the fill-in flash mode. The center of the subject is too dark. If the center of the subject is too dark, the surrounding area emerges as too bright. Adjust the exposure compensation toward minus (-). The ISO is at a high Set the ISO to AUTO or to a low sensitivity: 80. setting. The aperture value is small in A (M) mode. The shutter speed setting is too slow in S (M) mode. Increase the aperture value. Or set the camera to P mode. Increase the shutter speed or set the camera to P mode. Ref. Page P.68, 95 P.41 P.74 P.244 P.74 P.126 P.125 P.86 P.87 11 Miscellaneous 229