Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 25
Charging the battery - c battery charger
View all Olympus 5060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Getting started Charging the battery This camera uses one BLM-1 lithium ion battery. Other batteries cannot be used. The battery is not fully charged at the time of purchase. Before using the camera, charge the battery using the BCM-2 charger. For more details, read the instructions provided with the charger. 1 Plug the power cord into the charger. 1 2 Plug the other end of the power cord into a household electrical outlet. AC wall outlet 3 Remove the protection cap from the battery. Place the battery on the charger, making sure that it is correctly oriented as shown in the illustration. • Align the battery with the guideline on the charger ( ), and insert the battery into the Protection cap charger as far as it will go. • Meaning of the charge lamp indications: Lights red : Charging Charge indicator Lights green: Charging is completed. Blinks red : Charging failure • The battery charges in approximately 6 hours. The charging time may differ according to the amount of power left in the battery. Guideline • Use only the specified charger. • The battery becomes warm during charging, but this is not a Note malfunction. • If you intend to use the camera for a long period of time, you are recommended to carry a spare battery (sold separately) with you. • Always secure the protection cap to the battery when handling or carrying to prevent the short-circuiting of the battery terminals. 24