Philips DVD740VR Owners Manual - Page 16
Video Cassette Playback - cst in
View all Philips DVD740VR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
DVD740VR 4/12/02 12:08 PM Page 16 16 Video Cassette Playback VCR Read and follow the steps below to play a tape. 1 Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the DVD/VCR is set to. Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correct audio and video in channel at the TV. Details are on page 11. 2 With the DVD/VCR power off, insert a tape in the cassette compartment of the DVD/VCR. The Power, VIDEO, VCR/TV, and CST. IN lights will appear on the front of the DVD/VCR. If the tape's record tab has been removed, playback will start automatically. If the DVD/VCR power is already on, press OUTPUT SELECT to put the DVD/VCR in VCR mode if necessary. The green VIDEO light will appear on the front of the DVD/VCR. 3 If playback does not start automatically, press VCR, then press PLAY B (o). 4 Press STOP C (p) to stop playback. 5 Press REW h (s) to rewind the tape. 6 After the tape stops, press STOP/EJECT on the DVD/VCR to remove the tape. 1 Turn on the TV. 2 Insert a tape in the DVD/VCR. MARKER POWER SETUP AUDIO SUBTITLE ANGLE REC/OTR TITLE REPEAT CHANNEL/SKIP CLEAR MODE REPEAT A-B RETURN OUTPUT SELECT DVD DISC VCR MENU OK 3 4 5 STOP PLAY REW 1 4 FF PAUSE TIMER SET 23 VCR/TV 56 6 Press STOP/EJECT on the DVD/VCR. Helpful Hints • If the tape you want to play is already in the DVD/VCR, make sure the DVD/VCR power is on and the DVD/VCR is in VCR mode and VCR position. (The green VIDEO light and the VCR/TV light will appear on the front of the DVD/VCR.) Press VCR, then press PLAY B(K). • Other tape playback options and features are on pages 39-46. • When you play a tape recorded in S-VHS format on this unit, you can not get the high resolution that would be available on an S-VHS VCR. Noise lines (black and white streaks) may appear on the picture. • If REPEAT PLAY is ON, playback will begin automatically when you insert a tape, even when the record tab is intact. Details are on page 39. • You must connect the DVD/VCR to a TV using the RF coaxial cable or the audio/video cables in order to use the VCR features.