Philips DVD740VR Owners Manual - Page 71

DVD740VR 4/12/02 12:09 PM Page 71 Black Level Settings, TruSurround Setting 71 DVD Black Level Settings Adjust the Black Level Settings to make the black parts of the DVD picture as bright as you prefer. q Before you begin, place the DVD/VCR in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR. 1 Press DVD, then press MODE once during DVD playback so BLACK LEVEL shows in the top left corner of the TV screen. 1 2 Within 10 seconds, press OK repeatedly to choose ON or OFF. ON brightens the dark parts of the picture. OFF shows the original picture as recorded. BLACK LEVEL : ON MARKER POWER SETUP AUDIO SUBTITLE ANGLE REC/OTR TITLE REPEAT CHANNEL/SKIP CLEAR MODE REPEAT A-B RETURN OUTPUT SELECT DVD DISC VCR MENU OK 2 STOP REW PAUSE PLAY FF TruSurround Setting You can enjoy improved stereo sound when you play DVDs or Audio CDs recorded in Dolby Digital, PCM 48 kHz, or MPEG Audio. Check the Disc case for details on availability. 1 Press DVD, then press MODE twice during Disc playback so SRS TruSurround shows in the top left corner of the TV screen. 2 Within 10 seconds, press OK repeatedly to choose ON or OFF. The default setting is OFF. Choose ON only 1 if you connected the DVD/VCR to a stereo that has a Dolby Digital or MPEG decoder. Make sure the current DVD is recorded in Dolby Digital, PCM 48 kHz, or MPEG Audio. SRS TruSurround ON MARKER POWER SETUP AUDIO SUBTITLE ANGLE REC/OTR TITLE REPEAT CHANNEL/SKIP CLEAR MODE REPEAT A-B RETURN OUTPUT SELECT DVD DISC VCR MENU OK 2 STOP REW PAUSE PLAY FF This unit employs TruSurround system of SRS Labs, Inc. as virtual technology. TruSurround and the symbol are trademarks of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS Labs, Inc. Helpful Hints • SRS TruSurround is available only when the DVD/VCR is connected to a TV or Stereo using the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR. • If you connected the DVD/VCR to a stereo using the COAXIAL DIGITAL AUDIO OUT jack as described on page 13, turn off SRS TruSurround; otherwise, there will be no sound.