Philips DVD740VR Owners Manual - Page 41

DVD740VR 4/12/02 12:09 PM Page 41 VCR Follow the steps below to program the DVD/VCR to search forward or backward on a tape a specific length of time. There must be a tape in the DVD/VCR. q Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR. 1 Press VCR, then press SEARCH MODE/TIME SEARCH. TIME SEARCH 0:00 Time Search 41 MARKER POWER SETUP AUDIO SUBTITLE ANGLE REC/OTR TITLE REPEAT CHANNEL/SKIP CLEAR MODE REPEAT A-B RETURN OUTPUT SELECT DVD VCR DISC MENU OK 1 ENTER SEARCH TIME 2 Within 10 seconds, use the Number buttons to enter the desired length of time you want to skip 3 forward or backward. For example, for 1 hour, 25 min- utes, press Number buttons 1, 2, 5. Or, for five minutes, press Number buttons 0, 0, 5. 2 3 Within 10 seconds, press FF g (B) or REW h (s). The DVD/VCR will skip over the specified length of time, then begin playback. STOP PLAY REW FF PAUSE TIMER SET 1 23 VCR/TV 4 56 MEMORY 7 89 +10 0 SPEED SEARCH MODE DISPLAY ZOOM SLOW TIME SEARCH STATUS/EXIT Helpful Hints • If you want to search for more than 59 minutes, you must enter the length of time in hours and minutes. For example, to search forward 70 minutes, press 1,1,0 at step 2. • You cannot do a Time Search while recording. • To remove the Time Search display, press SEARCH MODE/TIME SEARCH again. • To cancel a Time Search that is in progress, press STOP C (p). • If the end of the tape is reached during a Time Search, the Time Search will be cancelled. The DVD/VCR may rewind the tape. Details are on page 43.