Ricoh Aficio SP 9100DN Hardware Guide - Page 43
Using DHCP - Detecting the Network Address Automatically, If you use IPv4
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Ethernet Configuration 8. If you use IPv4, assign the IPv4 address to the printer. Press the [ ] or [ ] key to select [IPv4 Settings], and then press the [ Enter] key. To get the IP address for the printer, contact your network administrator. 9. To specify the IP Address, press the [ ] or [ ] key to select [IPv4 Address], and then press the [ Enter] key. 4 If you use IPv4, also assign Subnet Mask and Gateway Address. 10. Press the [ ] or [ ] key to enter the address, and then press the [ Enter] key. After completing to enter in the all fields, press the [ Enter] key. Use this method to assign the subnet mask and gateway address. Do not set "011.022.033.044" as the IP address. 11. Press the [Menu] key to return to the initial screen. 12. Print a configuration page to confirm the settings made. • For details about printing the configuration page, see p.33 "Test Printing". Using DHCP - Detecting the Network Address Automatically • When you use this printer in DHCP environment, select [DHCP] following this procedure. • When [DHCP] is selected, you cannot make settings for the IP address and gateway address • Consult your network administrator for information about making network settings. 1. Press the [Menu] key. 41