Ricoh Aficio SP 9100DN Hardware Guide - Page 49
IEEE 802.11b (Wireless LAN) Configuration, Trans. Speed
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
IEEE 802.11b (Wireless LAN) Configuration IEEE 802.11b (Wireless LAN) Configuration Configure the printer to use IEEE 802.11b (Wireless LAN). The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu. Comm.Mode Setting Name Default Value 802.11 Ad hoc Channel Trans. Speed SSID Security Method Metric version: (1-13) 13 Inch version: (1-11) 11 4 Auto blank None • For using the IEEE 802.11b interface unit, installing the optional SDRAM module is required. If the optional SDRAM module is not installed, the printer does not detect the unit, and also it does not function because of memory shortage. • To use IEEE 802.11b (Wireless LAN), set as the followings using the control panel: press the [Menu] key, and then select [Host Interface], [Network Setup], [LAN Type], and then [IEEE 802.11b]. Also, set the IP address, subnet mask, gateway address, DHCP, Frame Type (NW), and active protocol. • The 802.11b interface unit cannot be used simultaneously with a standard ethernet interface. 1. Press the [Menu] key. AST008S The menu appears on the display. 47