Ricoh Aficio SP 9100DN Hardware Guide - Page 69
Changing the Paper Size in Tray 2 and 3
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Loading Paper Changing the Paper Size in Tray 2 and 3 The following explains the procedure for changing a paper size in Tray2 and 3. • If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side fence may slip out of place. • Check the top of the paper is aligned to the right side. • Do not stack paper over the limit mark. 1. Check that paper in the paper tray is not in use for printing, and then pull the tray carefully out until it stops. 6 ANS058S 2. Remove paper if loaded. 3. Release the lock on the side fence. ANS023S 4. While pressing down the release lever, slide the side fence until they are aligned the paper size you want to load. 67
Changing the Paper Size in Tray 2 and 3
The following explains the procedure for changing a paper size in Tray2 and 3.
•
If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side fence
may slip out of place.
•
Check the top of the paper is aligned to the right side.
•
Do not stack paper over the limit mark.
1.
Check that paper in the paper tray is not in use for printing, and then pull the tray carefully
out until it stops.
ANS058S
2.
Remove paper if loaded.
3.
Release the lock on the side fence.
ANS023S
4.
While pressing down the release lever, slide the side fence until they are aligned the paper
size you want to load.
Loading Paper
67
6