Ricoh Aficio SP 9100DN Hardware Guide - Page 50
Web browser, and Configuring the Network Interface Board Using Web Browser, Software
View all Ricoh Aficio SP 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4. Configuration 2. Press the [ ] or [ ] key to select [Host Interface], and then press the [ Enter] key. 3. Press the [ ] or [ ] key to select [IEEE 802.11b], and then press the [ Enter] key. 4. Press the [ ] or [ ] key to select [Comm. Mode], and then press the [ Enter] key. 4 5. Press the [ ] or [ ] key to select the transmission mode of IEEE 802.11b, and then press the [ Enter] key. • The factory default is [802.11 Ad hoc]. • To use an IEEE 802.11b card for which the SSID (Network Name) setting is not necessary, select [Ad hoc]. • The transmission mode of IEEE 802.11b can also be set using a Web browser. For details, see Web browser, and "Configuring the Network Interface Board Using Web Browser", Software Guide. 6. If [802.11 Ad hoc] or [Ad hoc] is selected for [Comm. Mode], set the channel to use for transmission. Consult your network administrator for the channel to use. 7. Press the [ ] or [ ] key to select [Channel], and then press the [ Enter] key. 8. Press the [ ] or [ ] key to select the channel, and then press the [ Enter] key. 9. Set [Trans. Speed] in the same way. 48