Samsung CLX 3160FN User Manual (ENGLISH) - Page 65

Cautions, Push the imaging unit until it sounds 'click' in to the machine.

Page 65 highlights

3 Extend the top handle on the imaging unit and then use it to pull the imaging unit out of the machine completely. 5 Pull the imaging unit about half and push it until it sounds 'click'. Repeat this action two or three times. Cautions • To prevent damage to the imaging unit, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary. • Do not touch the green surface on the imaging unit with your hands or any other material. Use the handle on it to avoid touching this area. • Be careful not to scratch the surface of the imaging unit. 4 With a dry lint-free cloth, wipe away any dust and spilled toner. 6 Push the imaging unit until it sounds 'click' in to the machine. Note • After cleaning, let the printer to dry completely. 7 Close the front cover firmly. Caution • If the front cover is not completely closed, the machine will not operate. 8 Plug in the power cord and turn the machine on. Caution • If there is a cracking sound, re-install the imaging unit. The imaging unit is not properly installed. 13.3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139

13
.3
<
Maintenance>
3
Extend the top handle on the imaging unit and then use it to pull the
imaging unit out of the machine completely.
4
With a dry lint-free cloth, wipe away any dust and spilled toner.
Cautions
To prevent damage to the imaging unit, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
Do not touch the green surface on the imaging unit with your
hands or any other material. Use the handle on it to avoid
touching this area.
Be careful not to scratch the surface of the imaging unit.
Note
After cleaning, let the printer to dry completely.
5
Pull the imaging unit about half and push it until it sounds ‘click’.
Repeat this action two or three times.
6
Push the imaging unit until it sounds ‘click’ in to the machine.
7
Close the front cover firmly.
8
Plug in the power cord and turn the machine on.
Caution
If the front cover is not completely closed, the machine will not
operate.
Caution
If there is a cracking sound, re-install the imaging unit. The
imaging unit is not properly installed.