Samsung CLX 3160FN User Manual (ENGLISH) - Page 79
Data Read Fail, LSU Hsync Error - low heat error
UPC - 635753712490
View all Samsung CLX 3160FN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Message [Stop Pressed] Cancel? Yes Connection Error Data Read Fail Check USB Mem. Data Write Fail Check USB Mem. Deve Home Sensor Error Document Jam Door Open Enter Again File Format Not Supported Fuser Fan Locked Meaning Suggested solutions Stop/Clear has been pressed during an operation. Try again. Your machine's memory has become full while trying to store an original into memory. To cancel the fax job, press the OK button to accept Yes. If you want to send those pages that have been successfully stored, press the OK button to accept No. You should send the remaining pages later, when memory is available. Connection with the SMTP server failed. Check the server settings and the network cable. Time expired while reading data. Try again. Storing to the USB memory failed. Check the available USB memory space. There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. The loaded original has jammed in the ADF. Clear the jam. See page 14.1. The front cover or rear cover is not securely latched. Close the cover until it locks into place. You entered an unavailable item. Enter the correct item again. The selected file format is not supported. Use the correct file format. There is a problem in the cooling fan of the machine. Open and then close the front cover. Message Group Not Available Install [Color] Toner Install [Part] Invalid [Color] Toner Invalid [Part] Line Busy Low Heat Error Cycle Power LSU Hsync Error Cycle Power LSU Motor Error Cycle Power Main Motor Locked Meaning You have tried to select a group location number where only a single location number can be used, such as when adding locations for a Multiple Send operation. The color toner cartridge is not installed. The corresponding part of the machine is not installed. The color toner cartridge you have installed is not for your machine. The color part of the machine is not for your machine. The receiving fax machine did not answer or the line is already engaged. There is a problem in the fuser unit. A problem has occurred in the LSU (Laser Scanning Unit). A problem has occurred in the LSU (Laser Scanning Unit). There is a problem in the main motor. Suggested solutions Use a speed dial number or dial a number manually using the number keypad. Install the color toner cartridge. Install the part into your machine. Install the a Samsung-genuine color toner cartridge designed for your machine. Install the a Samsung-genuine part designed for your machine. Try again after a few minutes. Unplug the power cord and plug it back in. If the problem persists, please call for service. Unplug the power cord and plug it back in. If the problem persists, please call for service. Unplug the power cord and plug it back in. If the problem persists, please call for service. Open and then close the front cover. 14.6