Samsung CLX 3160FN User Manual (ENGLISH) - Page 70

Caution, counter for the imaging unit. - imaging unit reset

Page 70 highlights

7 Holding the handles on the new imaging unit, push the imaging unit until it sounds 'click' into the machine. 9 Insert the toner cartridges and waste toner container into their corresponding slots until they click into place. 8 Remove four dummy caps which are on the toner cartridge entrances of the imaging unit. When you remove the dummy cap from the cartridge, lift the handle up and pull it out. 10 Close the front cover firmly. Caution • If the front cover is not completely closed, the machine will not operate. 11 Turn the machine on. Note • After rebooting, your machine will automatically reset the counter for the imaging unit. • If the installation is completed properly, a guide report is printed out automatically. Wait for about 1.5 minutes for the machine to get ready. Caution • If there is a cracking sound, re-install the imaging unit. The imaging unit is not properly installed. Caution • If you force too much to the dummy caps, it may cause problem. 13.8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139

13
.8
<
Maintenance>
7
Holding the handles on the new imaging unit, push the imaging unit
until it sounds ‘click’ into the machine.
8
Remove four dummy caps which are on the toner cartridge
entrances of the imaging unit. When you remove the dummy cap
from the cartridge, lift the handle up and pull it out.
Caution
If you force too much to the dummy caps, it may cause
problem.
9
Insert the toner cartridges and waste toner container into their
corresponding slots until they click into place.
10
Close the front cover firmly.
11
Turn the machine on.
Caution
If the front cover is not completely closed, the machine will not
operate.
Note
After rebooting, your machine will automatically reset the
counter for the imaging unit.
If the installation is completed properly, a guide report is
printed out automatically. Wait for about 1.5 minutes for the
machine to get ready.
Caution
If there is a cracking sound, re-install the imaging unit. The
imaging unit is not properly installed.