Sharp AL 1655CS AL-1655CS Operation Manual - Page 74
TROUBLESHOOTING AND MAINTENANCE, Indication, Cause and remedy, Lamp indicator, Display
UPC - 074000074712
View all Sharp AL 1655CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
TROUBLESHOOTING AND MAINTENANCE Indication Lamp indicator Display Cause and remedy Page INSTALL A TD CARTRIDGE. The TD cartridge is not installed correctly. Reinstall the TD cartridge. 85 Blinks REPLACE THE The drum cartridge has reached the end of DRUM its life. Replace it with a new drum 87 Error indicator CARTRIDGE. cartridge. TD CARTRIDGE Toner is low. Purchase a new TD IS NEAR EMPTY. cartridge. 85 Steadily A DRUM Less than 1000 sheets can be printed lit CARTRIDGE WILL with the current drum cartridge. BE NEEDED Purchase a new drum cartridge. 87 SOON. MEMORY FULL, PRESS START TO RESUME. Data is being held in memory. Print the data or clear it from memory. 34 NO 2-SIDED COPY FROM BYPASS Two sided printing or 2 IN 1 copying is TRAY. selected when the bypass tray is already selected ,or the bypass tray is selected when two-sided printing or 2 30 NO 2IN1 COPY FROM IN 1 copying is already selected. 35 BYPASS TRAY. The bypass tray cannot be used. Press the [TRAY SELECT] key ( ) to select a paper tray. NO 2IN1 COPY WITH MARGIN SHIFT. 2 IN 1 copy and margin shift cannot be used in combination. Cancel the function that was selected last. 35 38 COPY RATIO CAN NOT BE CHANGED IN 2IN1. Copy ratio can not be changed in 2 IN 1 29 copy. 35 THIS MENU IS NOT SELECTABLE WITH DATA. This appears if you attempt to change a user program setting while a print job 64 is in progress. NO XXXX SIZE TRAY There is no paper for printing. Press the [MODE SELECT] key to switch to printer mode and follow the instructions in the display. ("XXXX" indicates paper size) An original remains on the document glass, or the original is too thick to 24 scan. CHECK SPF/RSPF. START TO RESUME. If the message is not cleared when there is no original on the document glass, the underside of the RSPF is dirty. Clean the underside of the RSPF 89 (especially areas where black lines appear.) Printing is not possible if the paper size setting is different from the size of paper loaded in the tray. Load the LOAD XXXX PAPER INTO TRAY. same size of paper as the paper size setting and then press the [START] key 19 ( ). Printing will begin. ("XXXX" indicates paper size. The tray is indicated in .) NO PC COMMUNICATION; CHECK CABLE. The machine is not correctly connected to the computer. Check the cable (when using the scanner function). 46 47 72