Sony MZ-N1 Operating Instructions - Page 32
To activate the group mode (Group Mode Recording), Labeling/relabeling
View all Sony MZ-N1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
How is group information recorded? When recording in group mode, the group information is written to the disc name recording area automatically. This information consists of text strings that are written as shown in the following example. Disc name recording area Example END SEARCH Control bar (./>/ x) REC GROUP DISPLAY 1 2 3 1 Disc name: "Favorites". 2 Group name for tracks 1 to 5: "Rock". 3 Group name for tracks 6 to 9: "Pops". Therefore, the above character string is displayed in its entirety as the disc name if you load an MD recorded in group mode into a system that does not support group mode, or if you try to edit the contents of a disc on this recorder with the group mode turned off. It is possible to change the character string by doing "Relabeling recordings" procedure in the "Labeling/relabeling recordings" (page 50). Note that if you rewrite this character string by mistake, you may be unable to use the group function of that MD. Notes • The group function setting is stored even if you eject the MD or turn off the recorder. • In group mode, the recorder treats all tracks without group settings as belonging to the last group on the disc. The last group is indicated in the display window on the recorder as "Group --". Within a group, the tracks appear in their order on the disc, not their order within the group. • It will not be possible to make a group setting if the tracks, groups and disc name on a disc exceed the maximum number that can be input. 32 Control x To activate the group mode (Group Mode Recording) To record tracks in group mode, you must first turn group mode on before the start of recording. On the recorder 1 Press GROUP for 2 seconds or more. " " and "GROUP ON" light up and group mode turns on. On the remote control 1 Press DISPLAY for 2 seconds or more. 2 Turn the control repeatedly until "GROUP" flashes in the display, and then press x to enter. 3 Turn the control repeatedly until "GROUP ON" flashes in the display, and then press x to enter. "G" lights up and group mode turns on.