Sony MZ-N1 Operating Instructions - Page 91

Error message NAME FULL NO BATT NO COPY NO DISC No Entry! NO SIGNAL P/B ONLY PROTECTED REC ERR READ ERR Meaning/Remedy • You tried to enter more than 200 letters to label a single track, group, or disc. • You tried to enter a total of more than approximately 1,700 letters for track or disc names. , Enter a shorter name for the track, group, or disc (page 50), or set the "LP Stamp" setting to "Stamp OFF" so that "LP:" is not added at the beginning of the track name (page 30). • The rechargeable battery is not inserted. , Insert a rechargeable battery. • You tried to make a copy from a disc that is protected by the Serial Copy Management System. You cannot make copies from a digitally connected source which was itself recorded using digital connection. , Use analog connection instead (page 29). • You tried to play or record with no disc in the recorder. , Insert an MD. • You tried to erase a setting in the Personal Disc Memory on a disc that contains no settings in the Personal Disc Memory. • The recorder could not detect digital input signals. , Make sure that the source is connected firmly (page 20). • You tried to record or edit on a pre mastered MD (P/B stands for "playback"). , Insert a recordable MD. • You tried to record or edit on a MD with the tab in the recordprotect position. , Slide the tab back (page 75). • Recording was not correctly done. , Place the recorder at a place with no vibrations and record again. • The disc is soiled with an oil film or finger prints, is scratched, or is not a standard disc. , Try recording again with another disc. • The recorder cannot read the disc information correctly. , Reinsert the disc. 91