Sony MZ-N1 Operating Instructions - Page 58
Registering tracks or groups as a new group (Group Setting), Registering tracks or
View all Sony MZ-N1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Registering tracks or groups as a new group (Group Setting) Do the following procedure to register tracks or groups as a new group. The tracks or groups must, however, be sequential. If the desired tracks or groups are not consecutive, you must move them to make them consecutive before you can register them ("Moving recorded tracks", page 60). The operation of this function depends on whether group mode is on or off. • When group mode is ON: - Several groups are registered as one group. - A track without a group setting can be registered to an existing group. • When group mode is OFF: Several tracks are registered as one group. The following section explains the operation when group mode is on. Group Group 123456789 Making a new group with tracks 1 to 3. Making a new group with 2 groups. Group Group 123456789 • Registration of non-consecutive tracks is not possible (for example, track 3 and tracks 5 to 7 cannot be registered to a new group). • Tracks always appear according to their order on the disc, not their order within the group (even when group mode is on). Note • It will not be possible to make a group setting if the tracks, groups and disc name on a disc exceed the maximum number that can be input. GROUP Jog dial DISPLAY Control x On the recorder 1 Press GROUP for 2 seconds or more to turn group mode on. 2 While the recorder is stopped, press the jog dial. 3 Turn the dial until "EDIT" flashes in the display, and then press to enter. 4 Turn the jog dial until " : Set" flashes in the display, and then press to enter. The track number of the first track ("STR") appears in the display. STR:001 END:001 : 58