Sony MZ-N1 Operating Instructions - Page 46

3 Turn the control repeatedly to adjust the bass or the treble. Example: While adjusting the bass The cursor moves. (Position: -2) -4 ±0 +3 The sound can be adjusted in 8 steps (-4, -3, ...±0, ...+2, +3). To switch "B" (bass) and "T" (treble): Press SOUND for 2 seconds or more. To switch "SOUND 1" and "SOUND 2": Press SOUND for a short time. 4 Press x to enter. The sound settings are saved and the playback display appears again. To cancel the Digital Sound Preset • On the recorder Select "SOUND OFF" in step 3. • On the remote control Press SOUND repeatedly until nothing appears in the display. z • The settings can be stored to the Personal Disc Memory (page 69). • If the recorder is not operated approximately for 5 minutes, the current setting is stored and the display automatically switches to normal play. Notes • Digital Sound Preset becomes inoperative when the "AUDIO OUT" parameter for the i/LINE OUT jack is set to "LINE OUT". In this case, set the "AUDIO OUT" to "HeadPhone" (page 27). • When you use the Digital Sound Preset, the sound may break or become distorted depending on the settings or the track. Tn this case, change the settings of the sound quality. 46 • Changing to another Digital Sound Preset during a recording operation will not affect the quality of recorded sound. To change playback speed (Speed Control) The playback speed can be adjusted in 7 steps (80%, 85%, ...100%, 105%, 110%). • This function can be operated on the remote control only. DISPLAY Control x 1 While the recorder is playing, press DISPLAY for 2 seconds or more. 2 Turn the control repeatedly until "SPEED" flashes in the display, and then press x to enter. The recorder changes to speed-setting mode. 3 Turn the control repeatedly to select the playback speed. "+" shows the normal speed and the cursor shows the playback speed you are selecting. Example: while the playback speed is 95% of normal. - and the cursor appear alternately in the display. 80% 100% 110%