TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 199

Configuring Protocol VLAN Protocol VLAN Configuration 802.1p Priority Specify the 802.1p priority for the packets that belong to the protocol VLAN. The switch will determine the forwarding sequence according this value. The packets with larger value of 802.1p priority have the higher priority. 2) Select the desired ports. Click Create. Note: The member port of an LAG (Link Aggregation Group) follows the configuration of the LAG and not its own. The configurations of the port can take effect only after it leaves the LAG. 2.2 Using the CLI 2.2.1 Configuring 802.1Q VLAN Before configuring protocol VLAN, create an 802.1Q VLAN and set the port type according to network requirements. For details, refer to Configuring 802.1Q VLAN. 2.2.2 Creating a Protocol Template Follow these steps to create a protocol template: Step 1 Step 2 Step 3 Step 4 Step 5 configure Enter global configuration mode. protocol-vlan template name protocol-name frame { ether_2 ether-type type | snap ether-type type | llc dsap dsap_type ssap ssap_type } Create a protocol template. protocol-name: Specify the protocol name with 1 to 8 characters. type: Enter4 hexadecimal numbers as the Ethernet protocol type for the protocol template. It is the Ether Type field in the frame and is used to identify the data type of the frame. dsap_type: Enter 2 hexadecimal numbers as the DSAP value for the protocol template. It is the DSAP field in the frame and is used to identify the data type of the frame. ssap_type: Enter 2 hexadecimal numbers as the SSAP value for the protocol template. It is the SSAP field in the frame and is used to identify the data type of the frame. show protocol-vlan template Verify the protocol templates. end Return to Privileged EXEC Mode. copy running-config startup-config Save the settings in the configuration file. User Guide 174