TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 58

Managing System System Info Configurations Step 3 UTC+11:00 -- TimeZone for Solomon Is., New Caledonia, Vladivostok. UTC+12:00 -- TimeZone for Fiji, Magadan, Auckland, Welington. UTC+13:00 -- TimeZone for Nuku'alofa, Samoa. ntp-server: Specify the IP address of the primary NTP server. backup-ntp-server: Specify the IP address of the backup NTP server. fetching-rate: Specify the interval fetching time from the NTP server. Use the following command to verify the system time information. show system-time Verify the system time information. Use the following command to verify the NTP mode configuration information. show system-time ntp Verify the system time information of NTP mode. Step 4 end Return to privileged EXEC mode. Step 5 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the system time by Get Time from NTP Server and set the time zone as UTC+08:00, set the NTP server as 133.100.9.2, set the backup NTP server as 139.78.100.163 and set the update rate as 11. Switch#configure Switch(config)#system-time ntp UTC+08:00 133.100.9.2 139.78.100.163 11 Switch(config)#show system-time ntp Time zone : UTC+08:00 Prefered NTP server: 133.100.9.2 Backup NTP server: 139.78.100.163 Last successful NTP server: 133.100.9.2 Update Rate: 11 hour(s) Switch(config)#end Switch#copy running-config startup-config User Guide 33