TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 280

Configuring Layer 2 Multicast Multicast Filtering Configuration Follow these steps to bind the profile to ports and configure the corresponding parameters for the ports: 1) Select one or more ports to configure. 2) Specify the profile to be bound, and configure the maximum groups the port can join and the overflow action. Profile ID Specify the ID of an existing profile to bind the profile to the selected ports. One port can only be bound to one profile. Maximum Groups Enter the number of multicast groups the port can join. Valid values are from 0 to 1000. Overflow Action Select the action the switch will take with the new multicast member groups when the number of multicast groups the port has joined exceeds the maximum. Drop: Drop all subsequent membership report messages to prevent the port joining a new multicast groups. Replace: Replace the existing multicast group that has the lowest multicast MAC address with the new multicast group. LAG Displays the LAG the port belongs to. Operation 3) Click Apply. Click Clear Profile to clear the binding between the profile and the port. 5.2 Using the CLI 5.2.1 Creating the Multicast Profile You can create multicast profiles for both IPv4 and IPv6 network. With multicast profile, the switch can define a blacklist or whitelist of multicast groups so as to filter multicast sources. Creating IGMP Profile (Multicast Profile for IPv4) Step 1 Step 2 configure Enter global configuration mode. ip igmp profile id Create a new profile and enter profile configuration mode. User Guide 255