TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 644

Configuring AAA AAA Configuration Step 4 Step 5 end Return to privileged EXEC mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to add a TACACS+server on the switch. Set the IP address of the server as 192.168.0.20, the authentication port as 49, the shared key as 123456, and the timeout as 8 seconds. Switch#configure Switch(config)#tacacs-server host 192.168.0.20 auth-port 49 timeout 8 key 123456 Switch(config)#show tacacs-server Server Ip Port Timeout Shared key 192.168.0.20 49 8 123456 Switch(config)#end Switch#copy running-config startup-config 2.2.2 Configuring Server Groups The switch has two built-in server groups, one for RADIUS and the other for TACACS+. The servers running the same protocol are automatically added to the default server group. You can add new server groups as needed. The two default server groups cannot be deleted or edited. Follow these steps to add a server group: Step 1 configure Enter global configuration mode. Step 2 aaa group { radius | tacacs } group-name Create a server group. radius | tacacs: Specify the group type. group-name: Specify a name for the group. Step 3 server ip-address Add the existing servers to the server group. ip-address: Specify IP address of the server to be added to the group. Step 4 show aaa group [ group-name ] Verify the configuration of server group. User Guide 619