TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 723

Configuring ACL ACL Configuration rule 5 permit logging disable action redirect Gi1/0/4 Switch(config)#end Switch#copy running-config startup-config 2.2.4 Configuring ACL Binding You can bind the ACL to a port or a VLAN. The received packets on the port or in the VLAN will then be matched and processed according to the ACL rules. An ACL takes effect only after it is bound to a port or VLAN. Note: •• Different types of ACLs cannot be bound to the same port or VLAN. •• Multiple ACLs of the same type can be bound to the same port or VLAN. The switch matches the received packets using the ACLs in order. The ACL that is bound earlier has a higher priority. Follow the steps below to bind ACL to a port or a VLAN: Step 1 configure Enter global configuration mode Step 2 access-list bind acl-id-or-name interface { [ vlan vlan-list ] | [ fastEthernet port-list ] | [ gigabitEthernet port-list ] | [ ten-gigabitEthernet port-list ] } Bind the ACL to a port or a VLAN. acl-id-or-name: Enter the ID or name of the ACL that you want to add a rule for. vlan-list: Specify the ID or the ID list of the VLAN(s) that you want to bind the ACL to. The valid values are from 1 to 4094, for example, 2-3,5. port-list: Specify the number or the list of the Ethernet port that you want to bind the ACL to. Step 3 Step 4 Step 5 show access-list bind View the ACL binding configuration. end Return to privileged EXEC mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to bind ACL 1 to port 3 and VLAN 4: Switch#configure Switch(config)#access-list bind 1 interface vlan 4 gigabitEthernet 1/0/3 SSwitch(config)#show access-list bind User Guide 698