TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 885

Configuring SNMP & RMON SNMP Configurations Read View Write View Notify View 2) Click Create. Choose a view to allow parameters to be viewed but not modified by the NMS. The view is necessary for any group. Choose a view to allow parameters to be modified by the NMS. The view in Write View should also be added to Read View. Choose a view to allow it to send notifications to the NMS. 2.1.5 Creating SNMP Users (For SNMP v3) Choose the menu MAINTENANCE > SNMP > SNMP v3 > SNMP User and click to load the following page. Figure 2-6 Creating an SNMP User Follow these steps to create an SNMP user: 1) Specify the user name and user type as well as the group which the user belongs to. Then configure the security level. User Name Set the SNMP user name using 1 to 16 characters. For different entries, user names cannot be the same. User Type Choose a user type based on the location of the user. Local User: The user resides on the local engine, which is the SNMP agent of the switch. Remote User: The user resides on the NMS. Before configuring a remote user, you need to set the remote engine ID first. The remote engine ID and user password are used when computing the authentication and privacy digests. Group Name Choose the name of the group that the user belongs to. Users with the same Group Name, Security Model and Security Level will be in the same group. Security Model Displays the security model. SNMPv3 uses v3, the most secure model. User Guide 860