TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 88

Managing System PoE Configurations (Only for Certain Devices) Step 8 show power inline Verify the global PoE information of the system. Step 9 show power inline configuration interface [ fastEthernet { port | port-list } | gigabitEthernet { port | port-list } | ten-gigabitEthernet { port | port-list }] Verify the PoE configuration of the corresponding port. port: Specify the Ethernet port number, for example 1/0/1. port-list: Specify the list of Ethernet ports, in the format of 1/0/1-3, 1/0/5. Step 10 show power inline information interface [ fastEthernet { port | port-list } | gigabitEthernet { port | port-list } | ten-gigabitEthernet { port | port-list } ] Verify the real-time PoE status of the corresponding port. port: Specify the Ethernet port number, for example 1/0/1. port-list: Specify the list of Ethernet ports, in the format of 1/0/1-3, 1/0/5. Step 11 end Return to privileged EXEC mode. Step 12 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the system power limit as 160 W. Set the priority as middle and set the power limit as class3 for the port 1/0/5. Switch#configure Switch(config)#power inline consumption 160 Switch(config)#interface gigabitEthernet 1/0/5 Switch(config-if)#power inline supply enable Switch(config-if)#power inline priority middle Switch(config-if)#power inline consumption class3 Switch(config-if)#show power inline System Power Limit: 160.0w System Power Consumption: 0.0w System Power Remain: 160.0w Switch(config-if)#show power inline configuration interface gigabitEthernet 1/0/5 Interface PoE-Status PoE-Prio Power-Limit(w) Time-Range PoE-Profile Gi1/0/5 Enable Middle Class3 No Limit None User Guide 63