TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 903

Configuring SNMP & RMON Notification Configurations ■■ Enabling the VLAN Traps Globally Step 1 configure Enter Global Configuration Mode. Step 2 snmp-server traps vlan [ create | delete ] Enable the corresponding VLAN traps. The command without parameter enables all SNMP VLAN traps. By default, all VLAN traps are disabled. create: Triggered when certain VLANs are created successfully. delete: Triggered when certain VLANs are deleted successfully. Step 3 end Return to Privileged EXEC Mode. Step 4 copy running-config startup-config Save the settings in the configuration file. The following example shows how to configure the switch to enable all the SNMP VLAN traps: Switch#configure Switch(config)#snmp-server traps vlan Switch(config)#end Switch#copy running-config startup-config ■■ Enabling the SNMP Security Traps Globally Step 1 configure Enter Global Configuration Mode. Step 2 snmp-server traps security { dhcp-filter | ip-mac-binding } Enable the corresponding security traps. By default, all security traps are disabled. dhcp-filter: Triggered when the DHCPv4 Filter feature is enabled and the switch receives DHCP packets from an illegal DHCP server. ip-mac-binding: Triggered when the ARP Inspection feature is enabled and the switch receives an illegal ARP packet, or the IPv4 Source Guard feature is enabled and the switch receives an illegal IP packet. Step 3 end Return to Privileged EXEC Mode. Step 4 copy running-config startup-config Save the settings in the configuration file. User Guide 878