TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 900

Configuring SNMP & RMON Notification Configurations The following example shows how to configure an NMS host with the parameters shown in Table 3-1. Table 3-1 Parameters for the NMS Hosts Parameter Value IP Address UDP Port User Name Security Model Security Level Notification Type Retry Times Timeout Interval 172.16.1.222 162 admin v3 authPriv Inform 3 100 seconds Switch#configure Switch(config)#snmp-server host 172.16.1.222 162 admin smode v3 slev authPriv type inform retries 3 timeout 100 Switch(config)#show snmp-server host No. Des-IP UDP Name SecMode SecLev Type Retry Timeout --- ------ ----- ---- ------- ------ 1 172.16.1.222 162 admin v3 authPriv inform 3 100 Switch(config)#end Switch#copy running-config startup-config 3.2.2 Enabling SNMP Traps The switch supports many types of SNMP traps, like SNMP standard traps, ACL traps, and VLAN traps, and the corresponding commands are different. With a trap enabled, the switch will send the corresponding trap message to the NMS when the trap is triggered. Follow these steps to enable the traps according to your needs. ■■ Enabling the SNMP Standard Traps Globally Step 1 configure Enter Global Configuration Mode. User Guide 875