TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 74

Managing System System Tools Configurations Switch#copy running-config startup-config 4.2.2 Restoring the Configuration of the Switch Follow these steps to restore the configuration of the switch: Step 1 Step 2 enable Enter privileged mode. copy tftp startup-config ip-address ip-addr filename name Download the configuration file to the switch from TFTP server. ip-addr: Specify the IP address of the TFTP server. Both IPv4 and IPv6 addresses are supported. name: Specify the name of the configuration file to be downloaded. Note: It will take some time to restore the configuration. Please wait without any operation. The following example shows how to restore the configuration file named file1 from the TFTP server with IP address 192.168.0.100. Switch>enable Switch#copy tftp startup-config ip-address 192.168.0.100 filename file1 Start to load user config file... Operation OK! Now rebooting system... 4.2.3 Backing up the Configuration File Follow these steps to back up the current configuration of the switch in a file: Step 1 enable Enter privileged mode. Step 2 copy startup-config tftp ip-address ip-addr filename name Back up the configuration file to TFTP server. ip-addr: Specify the IP address of the TFTP server. Both IPv4 and IPv6 addresses are supported. name: Specify the name of the configuration file to be saved. The following example shows how to backup the configuration file named file2 to TFTP server with IP address 192.168.0.100. Switch>enable Switch#copy startup-config tftp ip-address 192.168.0.100 filename file2 User Guide 49