TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 915

Configuring SNMP & RMON RMON Configurations Step 2 Step 3 Step 4 Step 5 rmon statistics index interface { fastEthernet port | gigabitEthernet port | tengigabitEthernet port } [ owner owner-name] [ status { underCreation | valid }] Configure RMON Statistic entries. index: Specify the index of the Statistics entry, which ranges from 1 to 65535. To configure multiple indexes, enter a list of indexes separated by commas, or use a hyphen to indicates a range of indexes. For example, 1-3, 5 indicates 1, 2, 3, 5. port: Specify the port to be bound to the entry. owner-name: Enter the owner name of the entry with 1 to 16 characters. The default name is monitor. underCreation | valid: Enter the status of the entry. UnderCreation indicates that the entry is created but invalid, while Valid indicates the entry is created and valid. By default, it is valid. The switch start to collect Ethernet statistics for a Statistics entry since the entry status is configured as valid. show rmon statistics [ index ] Displays the statistics entries and their configurations. index: Enter the index of statistics entry that you want to view. Valid values are from 1 to 65535. The command without any parameters displays all existing statistics entries. end Return to Privileged EXEC Mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to create Statistics entries 1 and 2 on the switch to monitor port 1/0/1 and 1/0/2, respectively. The owner of the entries are both monitor and the status are both valid: Switch#configure Switch(config)#rmon statistics 1 interface gigabitEthernet 1/0/1 owner monitor status valid Switch(config)#rmon statistics 2 interface gigabitEthernet 1/0/2 owner monitor status valid Switch(config)#show rmon statistics Index Port Owner State ----- ---- ----- ----- 1 Gi1/0/1 monitor valid 2 Gi1/0/2 monitor valid Switch(config)#end User Guide 890