TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 623

Configuring Access Security Access Security Configurations Step 4 ip http max-users admin-num operator-num poweruser-num user-num Specify the maximum number of users that are allowed to connect to the HTTP server. The total number of users should be no more than 16. admin-num: Enter the maximum number of users whose access level is Admin. The valid values are from 1 to 16. operator-num: Enter the maximum number of users whose access level is Operator. The valid values are from 0 to 15. poweruser-num: Enter the maximum number of users whose access level is Power User. The valid values are from 0 to 15. user-num: Enter the maximum number of users whose access level is User. The valid values are from 0 to 15. Step 5 show ip http configuration Verify the configuration information of the HTTP server, including status, session timeout, access-control, max-user number and the idle-timeout, etc. Step 6 end Return to privileged EXEC mode. Step 7 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the session timeout as 9, set the maximum admin number as 6, and set the maximum operator number as 2, the maximum power user number as 2, the maximum user number as 2. Switch#configure Switch(config)#ip http server Switch(config)#ip http session timeout 9 Switch(config)#ip http max-user 6 2 2 2 Switch(config)#show ip http configuration HTTP Status: Enabled HTTP Port: 80 HTTP Session Timeout: 9 HTTP User Limitation: Enabled HTTP Max Users as Admin: 6 HTTP Max Users as Operator: 2 HTTP Max Users as Power User: 2 HTTP Max Users as User: 2 Switch(config)#end User Guide 598