TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 890

Configuring SNMP & RMON SNMP Configurations Step 1 Step 2 Step 3 Step 4 Step 5 configure Enter Global Configuration Mode. snmp-server community name { read-only | read-write } [mib-view] Configure the community. name: Enter a group name with 1 to 16 characters. read-only | read-write: Choose an access permissions for the community. Read-only indicates that the NMS can view but cannot modify parameters of the view, while read-write indicates that the NMS can both view and modify. mib-view: Enter a view to allow it to be accessed by the community. The name contains 1 to 61 characters. The default view is viewDefault. show snmp-server community Displays community entries. end Return to Privileged EXEC Mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to set an SNMP community. Name the community as the nms-monitor, and allow the NMS to view and modify parameters of View: Switch#configure Switch(config)#snmp-server community nms-monitor read-write View Switch(config)#show snmp-server community Index Name Type MIB-View 1 nms-monitor read-write View Switch(config)#end Switch#copy running-config startup-config 2.2.4 Creating an SNMP Group (For SNMPv3) Create an SNMP group and set user access control with read, write and notify views. Meanwhile, set the authentication and privacy modes to secure the communication between the NMS and managed devices. Step 1 configure Enter Global Configuration Mode. User Guide 865