TP-Link T1600G-28PS Jetstream Smart Switches User Guide - Page 54

Managing System System Info Configurations Recurring Mode If you select Recurring Mode, specify a cycle time range for the Daylight Saving Time of the switch. This configuration will be used every year. Offset: Specify the time to set the clock forward by. Start Time: Specify the start time of Daylight Saving Time. The interval between start time and end time should be more than 1 day and less than 1 year(365 days). End Time: Specify the end time of Daylight Saving Time. The interval between start time and end time should be more than 1 day and less than 1 year (365 days). Date Mode If you select Date Mode, specify an absolute time range for the Daylight Saving Time of the switch. This configuration will be used only one time. Offset: Specify the time to set the clock forward by. Start Time: Specify the start time of Daylight Saving Time. The interval between start time and end time should be more than 1 day and less than 1 year(365 days). End Time: Specify the end time of Daylight Saving Time. The interval between start time and end time should be more than 1 day and less than 1 year (365 days). 3) Click Apply. 2.2 Using the CLI 2.2.1 Viewing the System Summary On privileged EXEC mode or any other configuration mode, you can use the following commands to view the system information of the switch: show interface status [ fastEthernet port | gigabitEthernet port | ten-gigabitEthernet port ] View status of the interface. port: Enter the number of the Ethernet port. show system-info View the system information including System Description, Device Name, Device Location, System Contact, Hardware Version, Firmware Version, System Time, Run Time and so on. The following example shows how to view the interface status and the system information of the switch. Switch#show interface status Port Status Speed Duplex FlowCtrl Jumbo Active-Medium Gi1/0/1 LinkDown N/A N/A N/A Disable Copper Gi1/0/2 LinkDown N/A N/A N/A Disable Copper User Guide 29