TP-Link TL-MR3040 User Guide - Page 28
TL-MR3040, Channel, Security Mode, Repeater, MAC Address, Name of remote AP SSID, Survey, MAC - problem
View all TP-Link TL-MR3040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router filed. If your country or region is not listed, please contact your local government agency for assistance. z Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. If you select auto, then the AP will select the best channel automatically. z Security Mode - Please refer to the Appendix C: Security Mode. ¾ If you choose Repeater, the next screen will appear as shown in Figure 3-18. In Repeater mode, the AP with WDS disabled will relays data to an associated root AP. AP function is enabled meanwhile. The wireless repeater relays signal between its stations and the root AP for greater wireless range. Please input the MAC address of root AP in the field "MAC Address". Figure 3-18 Quick Setup - Repeater z Name of remote AP (SSID) - Enter the name of a remote AP (also called the SSID) that you want to access. Click the Survey button behind it, you can choose one of searching results to fill in this field. z MAC Address - Enter the MAC address of AP that you want to access. When you use the survey function to fulfill the Name of remote AP (SSID), this field will be filled in automatically. z Region - This field determines which operating frequency will be used. To achieve more information, you can read the same glossary in Access Point part. -18-