TP-Link TL-MR3040 User Guide - Page 29
TL-MR3040, Security Mode, Bridge with AP, Wireless Network Name SSID, Region, Channel, Add a remote
View all TP-Link TL-MR3040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router z Security Mode - Please refer to the Appendix C: Security Mode. ¾ If you choose Bridge with AP, the next screen will appear as shown in Figure 3-19. This operation mode bridges the AP and up to 4 APs also in bridge mode to connect two or more wired LANs. Figure 3-19 Quick Setup - Bridge with AP z Wireless Network Name (SSID) - Enter a value of up to 32 characters. To achieve more information, you can read the same glossary in Access Point part. z Region - This field determines which operating frequency will be used. To achieve more information, you can read the same glossary in Access Point part. z Channel - This field determines which operating frequency will be used. To achieve more information, you can read the same glossary in Access Point part. z Add a remote AP - Click the Survey button to fill in the MAC of remote AP (1-4) field. z MAC of remote AP (1-4) - Enter the MAC address of AP that you want to access. z Security Mode - Please refer to the Appendix C: Security Mode. ¾ If you choose Client, the next screen will appear as shown in Figure 3-20. This operation mode bridges the AP and up to 4 APs also in bridge mode to connect two or more wired LANs. -19-