TP-Link TL-MR3040 User Guide - Page 57
Wireless Security
View all TP-Link TL-MR3040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router • Auth Type - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It indicates the authorization type of the Root AP. • Password - If the AP your Router is going to connect needs password, you need to fill the password in this blank. 4.6.2 Wireless Security Choose menu "Wireless→Wireless Security", you can configure the security settings of your wireless network. There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy), WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA2-PSK (Pre-Shared Key), WPA-PSK (Pre-Shared Key). Figure 4-23 ¾ Disable Security - If you do not want to use wireless security, select this check box, but it's strongly recommended to choose one of the following modes to enable security. ¾ WPA/WPA2 - Personal (Recommended) - It's the WPA/WPA2 authentication type based on pre-shared passphrase. -47-