TP-Link TL-R600VPN TL-R600VPN V1 User Guide - Page 22

MTU Size, Primary DNS & Secondary DNS, Use These DNS Servers, Host Name, Get IP with Unicast - site to site

Get TP-Link TL-R600VPN PDF manuals and user guides View all TP-Link TL-R600VPN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-3 ¾ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs you need to reduce the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. ¾ Primary DNS & Secondary DNS - If your ISP gives you one or two DNS addresses, select Use These DNS Servers and enter the primary and secondary addresses into the correct fields. Otherwise, the DNS servers will be assigned dynamically from ISP. ¾ Host Name - This option specifies the host name of the router. ) Note: If you get 'Address not found' errors when you go to a Web site, it is likely that your DNS servers are set up improperly. You should contact your ISP to get correct DNS server. ¾ Get IP with Unicast DHCP: A few ISPs' DHCP servers do not support the broadcast applications. If you can not get the IP address normally, you can choose this option. (You don't need select this option generally). 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
TL-R600VPN
SafeStream
Gigabit Broadband VPN Router User Guide
TM
16
Figure 4-3
¾
MTU Size
-
The normal MTU (Maximum Transmission Unit) value for most Ethernet networks
is 1500 Bytes. For some ISPs you need to reduce the MTU. But this is rarely required, and
should not be done unless you are sure it is necessary for your ISP connection.
¾
Primary DNS & Secondary DNS
-
If your ISP gives you one or two DNS addresses, select
Use These DNS Servers
and enter the primary and secondary addresses into the correct
fields. Otherwise, the DNS servers will be assigned dynamically from ISP.
¾
Host Name
–
This option specifies the host name of the router.
)
Note:
If you get ‘Address not found' errors when you go to a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get correct DNS server.
¾
Get IP with Unicast DHCP:
A few ISPs' DHCP servers do not support the broadcast
applications. If you can not get the IP address normally, you can choose this option. (You
don’t need select this option generally).