TP-Link TL-R600VPN TL-R600VPN V1 User Guide - Page 59

Rule List

Get TP-Link TL-R600VPN PDF manuals and user guides View all TP-Link TL-R600VPN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

TL-R600VPN SafeStreamTM Gigabit Broadband VPN Router User Guide Figure 4-51 ¾ Enable Bandwidth Control - Enable or disable the Bandwidth Control. ¾ Line Type - Select the Line Type of the WAN port. ¾ Egress/Ingress Bandwidth - Enter the Egress and Ingress Bandwidth through the WAN port. 4.11.2 Rule List Figure 4-52 ¾ Description - This is the information about the rules such as address range. ¾ Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0. ¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the WAN port, the default is 0. ¾ Enable - This displays the status of the rule. ¾ Modify - Click "Modify" to edit the rule, click "Delete" to delete the rule. To add/modify a Bandwidth Control rule: Step 1: Click Add New...Modify shown in Figure 4-52, you will see a new screen shown in Figure 4-53 Step 2: Enter the information like the screen shown below. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
TL-R600VPN
SafeStream
Gigabit Broadband VPN Router User Guide
TM
53
Figure 4-51
¾
Enable Bandwidth Control
-
Enable or disable the Bandwidth Control.
¾
Line Type
-
Select the Line Type of the WAN port.
¾
Egress/Ingress Bandwidth –
Enter the Egress and Ingress Bandwidth through the WAN
port.
4.11.2 Rule List
Figure 4-52
¾
Description
-
This is the information about the rules such as address range.
¾
Egress bandwidth -
This field displays the max and mix upload bandwidth through the WAN
port, the default is 0.
¾
Ingress bandwidth -
This field displays the max and mix download bandwidth through the
WAN port, the default is 0.
¾
Enable -
This displays the status of the rule.
¾
Modify -
Click “
Modify
” to edit the rule, click “
Delete
” to delete the rule.
To add/modify a Bandwidth Control rule:
Step 1:
Click
Add New
…
Modify
shown in Figure 4-52, you will see a new screen shown in
Figure 4-53
Step 2:
Enter the information like the screen shown below.